SN74AHCT1G125 single buffer
Batch BAT000945 · of SKU000919
This batch
BAT000945
Locations
| Bin | Identifier | Quantity | Type |
|---|
Physical quantity evidence
No uncertain physical quantities.
Codes
NoneBatch properties
source
DigiKey
order_number
93843522
purchase_date
2025-07-24
invoice_number
114724418
order_line
24
supplier_part_number
296-4709-1-ND
original_ordered_quantity
10
original_shipped_quantity
10
cost_per_unit
{"value":0.079,"unit":"$"}
order_line_amount
{"value":0.79,"unit":"$"}
Description
Partly used bag of cut-tape chips; function untested. DigiKey label dated 25-JUL-2025 15:16 (not asserted as shipment/delivery date); date code 2424+5, lot 4054550HFT, COO CN, MSL 1, LPN 012765140. Bag label and archived invoice agree on the order and line.
Created through automation
true
Automation source or version
Inventory Assistant 0.1.0+codex.20260919214048; gpt-6.1-sol (current host report)
Shared details from SKU000919
SN74AHCT1G125 single buffer
These details belong to the SKU and are shared by its batches.
TTL-compatible input buffer, useful for individual digital lines and compatible 3.3 V to 5 V logic translation. One bare IC per each; DCKR is the tape-and-reel ordering variant. Product reference: https://www.ti.com/product/SN74AHCT1G125/part-details/SN74AHCT1G125DCKR
Shared properties (24)
item_type
Electronic component
component_function
Buffer / line driver
manufacturer
Texas Instruments
part_number
SN74AHCT1G125DCKR
channel_count
1
logic_family
74AHCT
signal_direction
Unidirectional
signal_polarity
Non-inverting
output_structure
Three-state
independent_enable_groups
1
output_enable_behavior
Active-low OE: OE low passes A to Y; OE high makes Y high impedance.
supply_voltage_min
4.5 V
supply_voltage_max
5.5 V
output_source_current
8 mA
output_sink_current
8 mA
propagation_delay_max
9.5 ns
package
SMD (other)
package_designation
SC-70-5 (TI DCK)
terminal_count
5
specification_basis
Exact-part datasheet
datasheet_url
https://www.ti.com/lit/ds/symlink/sn74ahct1g125.pdf
electrical_rating_conditions
Source/sink currents are recommended drive magnitudes, not absolute maximum ratings. A-to-Y propagation maximum 9.5 ns is specified at VCC=5 V ±0.5 V, CL=50 pF, TA=-40 to 125 °C (TI Rev. P).
Created through automation
true
Automation source or version
Inventory Assistant 0.1.0+codex.20260919214048; gpt-6.1-sol (current host report)